And We Are Dry

After a meeting with a lovely woman this morning who is interested in building a Tiny House Community for single mothers, I ran over to the farm to see how the floor panel was doing. I hadn't been over since the rain storm the other night.

For the most part, the plastic cover stayed in place and the panel bays were dry. I removed the plastic to let the dampness, mostly condensation, out. Tomorrow morning I'll head over to finish stuffing the floor panel with insulation after I meet with Mark. Hopefully I can get him to commit to an afternoon this week to get some hands together to raise the walls. That would be awesome!

Rain on my Parade

The day after I last posted, a rain storm blew through Fairfield. I had the foresight to get a large 20'x25' piece of plastic (3 mil.) to cover up the floor boards prior to the storm. I covered the floor with the plastic, then placed approximately 8-10 miscellaneous pieces of 2"x6"x2' wood, and then stapled down all of the sides of the plastic. I was so proud of my proactivity. Planning is everything, so they say.

 

After the rain storm I returned to my TH to find that all of the plastic had blown off and the floor cavities and insulation were soaked. Ugh!

 

That was nearly two weeks ago and it is suppose to rain tomorrow. So Ellie and I headed over to the TH tonight to cover it up again. This time I placed 2"x8"x14's, which are the rafters for the roof, over the plastic in an attempt to keep it from blowing off. We also disbursed the miscellaneous pieces of wood in between the rafters.

 

Hopefully the plastic will stay in place through the day tomorrow. If the floor boards stay dry through tomorrow I will be able to begin my Senior Project work on Monday and finish insulating the floor boards. The next projects will be erecting the walls and start placing the rafters to install the roof.
 

 I still haven't decided on roofing material yet. I'm trying to locate some recycled materials but I haven't had much luck. I may have to go with insulation and purlins covered by a large vinyl tarp temporarily if I can not find any recycled roofing. Ideally I would like to find some used or scrap metal roofing. I'll spend some time online this weekend looking.

 

Installing the Subfloor

I have decided to install the subfloor and insulate simultaneously. I found that the loose foam scrapes are very light and easily blown around by the wind. So I am installing a couple panels of the subfloor, then stuffing in the loose foam insulation, then sealing up the remainder of the subfloor.

It was a very exciting moment when I finished screwing in the first subfloor panel. I was alone in the field working by myself and I let out a huge hoot and did a little happy dance on my new little 4'x8' subfloor. On the other side of the 28 acre parcel I heard a reply hoot, I think it was from Kevin and Allie, which made me smile. Neighbors through the woods, what a wonderful thing!

I am finding that this tiny house is just barely workable for my one woman show. The 3/4" plywood panels that I am installing as sub-floor are pretty heavy. I am extremely fortunate that I started lifting some free weights a few weeks ago in an attempt to get into shape for my TH build. I can definitely tell that had I not been strength training I would not be able to maneuver some of the TH lumber and plywood alone without injuring myself.

Going solo on the TH build has lead me to discover that I need to be creative. When I was installing the first few panels of subfloor I found that they were 'floating' a bit after sinking the first couple screws. Subfloor moving over even 1/4" during install can have a cascading affect that can render you up a creek on the last couple panels. So here is a trick I devised... in order to keep plywood in place take a couple nails and sink them near the corners pinching the panel tightly. It worked like a charm! In these pictures you can see both my nail pinch trick and some of the recycled spray foam insulation I am using for the TH floor.

Another trick that I discovered is pre-drilling the holes for the screws. I ended up stripping a couple screw bits prior to coming up with this splendid idea! You just need to make sure that the drill bit is one of two sizes smaller in diameter than your screws.

I am also getting creative at finding cheap labor. My daughter had some girlfriends over so I started talking up the zip line that reaches across the swimming hole. Of course the teens jumped at the chance to go out to the farm "while I worked." In between their exploring walks I got them to help stuff foam by pushing it in the floor cavities with their legs while sitting. They saved me at least an hour of work. Thank you Ellie, Maddie and Alista for all of your help!  :-)

Well my hard day of work paid off. My supervisor (Buddy my dog) was pleased with my progress. I was able to insulate and secure 4 of the 7.5 subfloor panels. I also buttoned up the site with a large 3 mil plastic sheet to keep out any rain this week. As Buddy and I were leaving I noticed the beautiful sunset and just had to take a picture to share a little piece of my new home with all of you :-)

Insulating the Floor

Now that the wall panels are on-site I need to insulate my floor joists prior to installing the subfloor.

For my TH floor insulation I am using recycled spray foam. I obtained cut-off scraps of foam insulation from a large building that was insulated here in Fairfield. Typically after spray foam insulation is applied, it is trimmed and the excess foam is carved off. I lucked-in and got a dozen large lawn/leaf bags filled with foam insulation scraps. Sustainability Score!

The Wall Panels get Delivered!

We finally had a day where I could get enough volunteers and cool weather to move the wall panels. I have to say that that my fellow students at MUM are AWESOME. (Thank you guys!) We took all four wall panels over in one load via Mark's  flatbed trailer. (Thank you Mark!)

When we arrived at the Tiny House site only four of us were there and we had to unload the panels ourselves. We very quickly learned to utilize the balance point of the panels to our advantage easing them down onto the ground then flipping them over the remainder of the way.

At one point we had a runaway truck and trailer when Mark left the cab and forgot to put the emergency brake on... I've never seen Mark move so quickly :-)


The last panel for the North wall was the heaviest so we just slid it a couple feet off the back then Mark jumped in his truck and floored it. The panel quickly bumped off the back of the trailer and we were done for the day.

Lots of Changes

The reason I started blogging about my Tiny House experiences is because of my strong belief in community, sustainability, and permaculture. The last couple weeks I have been busy working on all fronts!

Fairfield Tiny House Communities

 

While the popularity of tiny houses is expanding throughout the US, the sense of TH Community building is not quite there yet, except in Fairfield Iowa that is! In Fairfield there are probably well over 30 tiny houses and many of them, I am happy to report, are part of miniature Tiny House Communities.

There is Prairie Song Farm (a.k.a. The Farm) a few miles North of Fairfield's center that has approximately 5-7 tiny structures. My friend Jason lives there and is building a really cool tiny dome-like structure. Even though he is in a separate tiny house community than mine, I spent some time helping move the hay bails into place earlier this week. All of the Tiny Houses that I am aware of at The Farm are off-grid (Sustainability... score!)

Of course there is SoFair Farms where my friend Tom Greene is building a TH Community. I believe there are 2-4 tiny houses currently in his community with plans for 2-4 more. Earlier this Spring I helped Tom with reclaiming some great old barn boards to be used in building one of SoFair's tiny houses. I am not certain what the off-grid energy plan is, or even if there is one. However, the Farm is being designed with many permaculture principles in mind. (Permaculture... score!)

 

A must visit in Fairfield is Abundance EcoVillage. Although their square footage does not qualify as "Tiny Houses" with a starting size of 500 sq. ft., the community itself is advanced and well established. The EcoVillage is completely off-grid with both solar and wind energy.  (Sustainability... score!) They have community and individual gardens, a swimming hole with a little beach, a recycling and waste program, walking paths and much more. Their location is within a couple miles of down town so their residents have the option of biking to accomplish many of their needs if they so desire. (More Sustainability... score!)

 

 

The Sustainable Living Coalition, a non-profit near the EcoVillage is also home to a few tiny houses. Currently there is a yurt, a 10'x10' tiny house, and a couple other tiny structures. I believe all of these tiny houses are off grid and their residents bring in the own water or do rain water catchment. (Sustainability and Permaculture.... score!)

 

The Hap Center (which is not really the name of the property) is a wonderful little plot of land near Abundance EcoVillage. There are currently four tiny houses, three of which are completely off-grid. (Sustainability.... score!) They also have a 4 season mini-greenhouse and an outdoor kitchen with a cob oven! All but one of the tiny houses at Hap's place has their own indoor kitchens, but as many of you TH dwellers know, in the summer cooking indoors can heat up your TH pretty fast! So an outdoor community kitchen for 3-season cooking is a fabulous idea. (Permaculture... score!)

My new community where my TH is going to reside currently has 4 Tiny Houses on-site at various stages of development. The largest is a beautiful hay bail and earth plaster home. At right around 500 sq. ft. they do not qualify as a Tiny House, but the remainder of the abodes on the 25+ acre farm are definitely tiny. All of the structures on the property are off-grid (Sustainability... score!)

The Tiny House Transition Plan

While we wait for the wall panels to join up with the floor panel we are making some physical and mental adjustments to get ready for our move.

 

The house that we are currently in is approximately 1100 sq. ft.. With our tiny house coming in at 240 sq. ft. we did not want to move in and have a unpleasant transition into a MUCH smaller space. Even if we add the loft space at the TH as square footage (3 lofts, 1@6'x8x and 2@6'x6') we are still at a small 360 sq. ft.

 

So, in anticipation for our move in a week or two, the three of us decided to temporarily move into  one of the bedrooms in our current house. The bedroom we moved into is approximately 10'x10' for a total of 100 sq. ft. We are using this room for all of our sleeping and daily activities except cooking and bathroom needs. We are thinking that this will enable us to feel like we have moved into a larger space when we move into the TH in a couple weeks. I can definitely feel the squeeze... especially when it comes to privacy and aligning routine schedules.

 

I'm wondering if any other TH goers have tried some similar strategies to assist with a smooth adaption into a TH.

 

One more thing to add that I am very excited about... I just began my Fall Semester of my senior year at Maharashi University of Management majoring in Sustainable Living. The course that I began today is 'Energy and Sustainability.' Not only does it look like it is going to cover a lot of awesome materials, in the afternoons we have hands on with a Sustainable Energy Project of our choice. One of the options is installing solar panels at a tiny house is Fairfield. Come to find out it will be at one of our new neighbors house out at the farm where we are setting up our TH.

 

Other fun options include making a solar phone charger, building a small wind turbine, and Massive Scale Solar Array Project development, just to name a few. I'm very much looking forward to taking this class instructed by Lonnie Gamble, a sustainable energy pioneer and creative guru originally from my home State of Maine. Whoop... Whoop.

 

Here's to a great month of learning about energy systems, some of which I hope to implement in our own TH!